โคมไฟ 3d jupiter หลากสีสัน ไฟกลางคืนในห้องนอน
Specifications
Product name: 3D Printing Jupiter Lamp
Material: PLA
Production process: 3D printing
Light Source: LED
Color： A-- 2 colors touch and tap white light /yellow light.
B-- 16 colors with remote.
Color temperature: 3000K （yellow）/ 6000K(white）
Brightness: Stepless adjustment
Battery capacity: 1 x 400mAh li-po battery ( built-in )
Charging time: 2-4 hours
Working time: 8-10hours ( depends on brightness )
Power supply: USB DC：5V /1A
Diameter: 15cm .
How to use it
1. Touch the metal ring at the bottom of the jupiter lamp to turn on / off the light and change color.
2. Long press the metal ring to adjust the brightness.
3. Insert the DC connector into the metal ring at the bottom of the jupiter lamp to charge the red light is always on during the charging.The red light will automatically turn off when fully charged.
4.16colors with 24keys remote can control the jupiter lamp .
5.If your hand is too dry or the temperature is too low the light may not respond.
6.If the light is not on you can try charging for 1-2 hours first.
Or wonder if the brightness of the light is adjusted to the darkest.
Package
1 x 3D Jupiter Lamp
1 x Wooden holder
1 x USB Power Cable
1 x English Instructions
1 x Remote
(4.58)
(5)
